Posts Tagged ‘Animated Objects’

Chashinai Railway April updates

Posted by Anthony_B on April 14, 2010 at 00:30

Information IconWhat I would consider to be one of the flagship routes for openBVE due to it’s innovation, and one of the most varied and enjoyable, namely » odakyufan’s Chashinai Railway «, has been updated. The Misaki Line from Tawaramoto to Hitachiomiya can now be driven back and forth in both directions (via seperate route files), which is fun. The ATC system has also been redesigned, such that a gradual, smooth brake curve is now implemented, along with a Rapid Mode which removes the smoothening for use in the rush hour where trains are more frequent and adhering to the timetable is harder. Driving the Chashinai 9000 Series train with ATC, TASC and ATO activated is one of the most enjoyable things which can be done with openBVE, so I’d strongly recommend that you give this a try — it’s well worth it. Instructions can be found » here «. Please also note that the source code for the plugins used by the Chashinai Railway’s trains is included within the train download, and I’d recommend that anyone considering plugin development in future, study the cleanly written, concise source code as well, of course bearing in mind that a move to cross-platform .NET plugins will occur in future. Incidentally, publishing the source code for plugins is something I would like to see more train developers doing in future, and certainly something I will be doing in future (I’ll be writing a new cross-platform .NET plugin for the new class 323 of course), once » openBVE 2 « is in a more advanced stage of development.

Moving road vehicles have also been added together with traffic sounds, shown to best visual effect on overbridges, I think particularly on the Koriyama Line (also bi-directional), Takahagi and Ishinden Lines, and vehicles can be seen travelling parallel to the railway between Shirosato and Motegi on the Misaki Line as well. The use of texture shifting functions here, enables vehicles to appear as though they’re travelling along the road, despite it’s apparent gradient and directional changes. I’ll be doing something similar at Watford Gap and other locations on the Watford Junction to Rugby route, using a technique developed for 3D vehicles by odakyufan, » details of which can be found here «. Other details, such as beacons correctly aligned with sleepers and track are taken care of too, as I’ve tried to do with AWS magnets in my routes. You’ll also find far more variation in the numbers of passengers waiting to board your train, which makes stations pleasing and fun to approach as there’s far more to see now; the recent changes to openBVE regarding the weight of the train increasing with passenger load and the effect this has on performance, can be used to good effect here (don’t forget to download the most recent version 1.2.6.1 of » openBVE « for this to work). Watch out for wheelslip depending on location, environmental or meteorological conditions too!

Developers might also be interested in taking a look at how the Chashinai Railway’s route files have been prepared. openBVE’s $Include directive has been used extensively, with much greater efficiency and flexibility now possible.

Please visit » The Web Presence of Odakyufan « to download the latest release of Chashinai Railway, and also » this thread on the openBVE forum «, where additional screenshots, information, details and benefts of $Include can be found. This is sophisticated, high quality and beautiful work, and I look forward to seeing more in future.

Images captured at 1680×1050, with smooth transparency and 16xQ anti-aliasing and 16x anisotropic filtering
(Please hover over any thumbnail image for a description)

About to pick up additional passengers waiting to join the train at Izumozaki North on the Misaki Line, with ATC indicating a clear line ahead. [Click to enlarge] Animated road vehicles crossing the overbridge at Kawarada station where the Ishinden and Uchiike Lines join together, as the warmth of the rising sun adds ambience the scene. [Click to enlarge]
openBVE / Chashinai Railway screenshots
Download from » The Web Presence of Odakyufan «
Horizontal Rule

Railsimroutes Projects

Railsimroutes LogoI know haven’t posted any updates regarding my own projects for some time, about which I can only apologise. I have a couple of features which I want to be working on for » openBVE 2 « first, however when I have time spare I’m also working on implementing another feature for both of my routes, and I’ll post some screenshots of this once I’m happy with how it all looks. More to follow fairly soon…

openBVE v1.2.5, Watford Jn. to Rugby progress, class 390 Pendolino, other developer’s add-ons, Cross-City South bugfix, and one million visits

Posted by Anthony_B on January 31, 2010 at 17:50

openBVE v1.2.5.0 released

openBVE LogoopenBVE v1.2.5.0 was released a few days ago, and various changes have been made to openBVE since my last blog entry. In this release, the main form (i.e. the window for route selection, setting options, etc.) is smaller so that it can be used on smaller screen sizes (e.g. 800×600) or with larger fonts, and if the window is resized, the new size is saved between sessions. The player’s train now derails when passing the end of the track, as well.

Michelle has also written an impressive RIFF/RIFX/WAV PCM/ADPCM parser, which she’s ported from openBVE’s successor to openBVE 1. This removes the need for two dependencies, namely ALUT and SDL, and her parser supports a wider range of sampling rates. Other improvements recently, include a shortening of loading times for routes using detailed animated objects (which eventual users of the projects being developed here will appreciate). Also, there’s the addition of the $Include preprocessing directive which allows text in other files to be parsed in place of the directive in a route file (with random selection of multiple included files), and point-based turns (via the .Turn command) are smoothened out, which gives much more pleasing results. Please see » this thread « for more discussion about these latter features.

Head over to the » openBVE homepage « to try the latest v1.2.5.0 release, and you can read the changelog for further details. Remember that the » developer tools « have also been updated as well.

Horizontal Rule

Watford Junction to Rugby progress update

Railsimroutes LogoIt’s been quite a while since I posted any updates regarding my routes, so I thought you might like to know what’s happening with the Watford Junction to Rugby project this time. I’m relatively happy with the state of the permanent way and between-station railway related lineside objects, so I’m now implementing some more scenery enhancements, including improved under-bridge shadow effects, moving road vehicles, and lineside buildings. I’ve also, at last, started working on the stations and so far I’ve created new photo-realistic lamposts, photo-realistic 3D platforms, and various signs.

Previously, the underbridge shadows I’d implemented were simple untextured meshes with alpha applied via the SetColor command. In addition, I’ve now applied a small 8×8 pixel texture where the outer 28 pixels act as the transparent color, and the inner pixels are nearly black. When this texture is applied to the existing shadow meshes and the color adjusted accordingly, smoothly transitioned shadows can be achieved. I’ve also added deeper shadows to the sleeper textures to improve the appearance of the track, and added more blue colouration along with reducing the lightness of the railhead, to make the rails look a little more metallic. I’m also implementing shadows cast by platforms and embankments as well. The way in which I’ve implemented the latter can give the appearance of dappled sunlight caused by trees, and increases the effect of warmth created by sunlight and the realism of locations within cuttings, although this feature will be optional in the final release as there’s a possibility that it may incur a performance penalty on slow graphics cards. Lastly, I’ve added some new photographic backdrops which I’m experimenting with at the moment. Take a look at the following screenshots to see how the route is coming along (please note that there may be some inaccuracies, as the route shows trackwork or infrastructure as it was in different eras simultaneously at the moment):

openBVE v1.2.5 and Watford Junction to Rugby--click to enlarge openBVE v1.2.5 and Watford Junction to Rugby--click to enlarge openBVE v1.2.5 and Watford Junction to Rugby--click to enlarge openBVE v1.2.5 and Watford Junction to Rugby--click to enlarge openBVE v1.2.5 and Watford Junction to Rugby--click to enlarge openBVE v1.2.5 and Watford Junction to Rugby--click to enlarge openBVE v1.2.5 and Watford Junction to Rugby--click to enlarge openBVE v1.2.5 and Watford Junction to Rugby--click to enlarge openBVE v1.2.5 and Watford Junction to Rugby--click to enlarge openBVE v1.2.5 and Watford Junction to Rugby--click to enlarge openBVE v1.2.5 and Watford Junction to Rugby--click to enlarge openBVE v1.2.5 and Watford Junction to Rugby--click to enlarge openBVE v1.2.5 and Watford Junction to Rugby--click to enlarge openBVE v1.2.5 and Watford Junction to Rugby--click to enlarge openBVE v1.2.5 and Watford Junction to Rugby--click to enlarge openBVE v1.2.5 and Watford Junction to Rugby--click to enlarge openBVE v1.2.5 and Watford Junction to Rugby--click to enlarge openBVE v1.2.5 and Watford Junction to Rugby--click to enlarge openBVE v1.2.5 and Watford Junction to Rugby--click to enlarge openBVE v1.2.5 and Watford Junction to Rugby--click to enlarge openBVE v1.2.5 and Watford Junction to Rugby--click to enlarge openBVE v1.2.5 and Watford Junction to Rugby--click to enlarge openBVE v1.2.5 and Watford Junction to Rugby--click to enlarge openBVE v1.2.5 and Watford Junction to Rugby--click to enlarge openBVE v1.2.5 and Watford Junction to Rugby--click to enlarge openBVE v1.2.5 and Watford Junction to Rugby--click to enlarge openBVE v1.2.5 and Watford Junction to Rugby--click to enlarge openBVE v1.2.5 and Watford Junction to Rugby--click to enlarge
openBVE v1.2.5, and Watford Junction to Rugby with new lineside buildings, station details, road vehicles, scenic shadows, and backdrops.
All screenshots taken at 1920×1200 resolution, with openBVE’s smooth transparency enabled, and 16xQ anti-aliasing/16x anisotropic filtering (Core 2 Quad Q9650 at default 3GHz, and GeForce GTX 260 55nm)
Horizontal Rule

Class 390 Pendolino

Railsimroutes LogoSome of you may remember that the class 390 Pendolino was given an » openBVE exterior car update « some time ago, thanks to Cramaboule. I’m pleased to announce that I’m now working with Cramaboule to produce some detailed exterior models of a similar quality to the class 323 I’ve demonstrated previously, along with a full 3D cab, so there will be some more nice looking rolling stock to run on Watford Junction to Rugby. I’ll post some screenshots as the models are developed, but for now here are some photos of what we can look forward to:

Class 390 Pendolino photograph (Milton Keynes, June 2005)--click to enlarge Class 390 Pendolino photograph (Milton Keynes, June 2005)--click to enlarge Class 390 Pendolino photograph (Cheddington, June 2005)--click to enlarge Class 390 Pendolino photograph (Old Linslade, October 2004)--click to enlarge
Class 390 Pendolino photos (1400×1050)
Horizontal Rule

Other more recent openBVE add-on releases

Information IconSince my last blog entry, some high quality openBVE add-ons have been released. Just in case anyone missed these releases, here are some screenshots and links to some excellent new add-ons with rather beautiful graphics:

Note: All screenshots taken at 1920×1200 resolution, with openBVE’s smooth transparency enabled, and 16xQ anti-aliasing/16x anisotropic filtering (Core 2 Quad Q9650 at default 3GHz, and GeForce GTX 260 55nm)
openBVE v1.2.5, FEVF Railway and EM A1 3D cab--click to enlarge openBVE v1.2.5, FEVF Railway and EM A1 3D cab--click to enlarge openBVE v1.2.5, FEVF Railway and EM A1 train--click to enlarge
FEVF Railway and EM A1 3D cab.
Homepage: » FEVF Railway «
Horizontal Rule
openBVE v1.2.5, mtrain HD v2.0 and Hong Kong Island Line--click to enlarge openBVE v1.2.5, mtrain HD v2.0 and Hong Kong Island Line--click to enlarge openBVE v1.2.5, mtrain HD v2.0 and Hong Kong Island Line--click to enlarge
mtrain HD v2.0 and Hong Kong Island Line.
Homepage: » winsome’s Studio « | » Hong Kong Island Line «
Horizontal Rule
openBVE v1.2.5, First Brno Track and CD163 plus coaches--click to enlarge openBVE v1.2.5, First Brno Track and CD163 plus coaches--click to enlarge openBVE v1.2.5, First Brno Track and CD163 plus coaches--click to enlarge
First Brno Track and CD163 plus coaches.
Homepage: » Brno BVE Website «
Horizontal Rule
openBVE v1.2.5, Guaianazes-Estudantes route and CAF 440 train--click to enlarge openBVE v1.2.5, Guaianazes-Estudantes route and CAF 440 train--click to enlarge openBVE v1.2.5, Guaianazes-Estudantes route and CAF 440 train--click to enlarge
Guaianazes-Estudantes route and CAF 440 train
Homepage: » BVE Brazil Fans «
Horizontal Rule

Upcoming openBVE projects to keep an eye on…

Information IconThere are a couple of new projects in the works which I’m personally very much looking forward to seeing, namely » Odakyufan’s « representation of the Odakyu Odawara Line running from Tokyo’s Shinjuku station, and the new Iida line currently being developed. The latter will of course be known to BVE users as one of Gaku’s classics (see my links page), but the new Iida line, train and exterior car objects being developed at » http://mus-iida.jpn.org « look beautiful and very realistic so far.

Some superb early screenshots of » Odakyufan’s « representation of the Odakyu Odawara line were also published a little while ago. The Odawara line starts from Tokyo’s busy Shinjuku station, and the line is well known for it’s Romancecar limited express services for tourists visiting Odawara and the surrounding resorts, but it’s also a busy commuter route and the Odakyu Electric Railway uses it’s own OM-ATS safety system, which will be simulated in a semi-realistic way due to the absence of detailed technical information. Odakyufan has a goal of modelling at least the first five stations, and this will be interesting to see, as this section of the line is surrounded by densely packed buildings. The screenshots showing the exit from Shinjuku station, Japanese 1500V DC catenary and Tokyo’s buildings all look very promising indeed, and easily recognisable, even at an early stage of development.

Odakyu Odawara line -- click to visit homepage Odakyu Odawara line -- click to visit homepage Odakyu Odawara line -- click to visit homepage
Homepage: » The Web Presence of Odakyufan «
Horizontal Rule
mus-iida.jpn.org -- click to visit homepage mus-iida.jpn.org -- click to visit homepage mus-iida.jpn.org -- click to visit homepage
Homepage: » http://mus-iida.jpn.org «
Horizontal Rule

Cross-City South bugfix

Railsimroutes LogoI’ve uploaded an update for Cross-City South v1.31, which fixes the following issues:
  • Incorrect pathname in route files using the class 323 passenger views.
  • The ground repeater signal prior to Birmingham New Street station is now accurately modelled, such that the red aspect is nearest to the driver (i.e. the signal is as though it were upside down now, as in reality). Many thanks to Paul Sladen for pointing this out.
  • In the night routes, “P” has been added as the ArrivalTime argument of the Five Ways .Sta commands (to indicate that trains are not meant to stop). Thanks again to Paul for bringing this omission to my attention.
  • Also in the night routes, the repetition count for Background(0) has been added, which was missing previously, leading to a horizontally compressed background image.

Existing Cross-City South v1.31.03 users can simply download a small update to v1.31.05 here: xcs_1_31_05_update.7z [180 KiB]. If you’re using a version earlier than v1.31.03, you might be better off downloading the full route pack again, which also now includes the aforementioned update. The previously separate class 37 and 158 route files are now included in the main download as well. Please also note that BVE 4 doesn’t work on my current Windows 7 64-bit/NVIDIA GeForce GTX 260 setup, so this update has only been tested in openBVE, as it’s inconvenient having to dual boot or use another computer every time I want to check some minor thing in the old BVE 4. There aren’t any changes which should affect BVE 4 users, but if any issues arise, please let me know with as much detail about the problem as possible, and I’ll investigate.

Horizontal Rule

Finally…

Railsimroutes LogoI noticed that the site has had it’s one millionth visit today (as opposed to page view), insofar as it’s possible to measure such things — the actual number of users of my routes will likely number in the low thousands, of course. Thank you to everyone who has taken an interest in my work during the eight or so years since this site was launched!

High resolution openBVE screenshots and updates

Posted by Anthony_B on October 12, 2009 at 07:39

Thankfully I have more time available now, so I should be able to pick up where I left off and resume development for openBVE. I recently upgraded my computer, and I’m rather pleased with how openBVE and various routes including my own are running on the new system, so I want to share a few more screenshots of how openBVE, Cross-City South v1.4 and Watford Junction to Rugby can run on higher-end hardware, as well as to show some progress being made. I’m working on adjusting the dawn lighting to produce some nice visuals on Cross-City South v1.4, and I’m also experimenting with some higher resolution catenary textures particularly suited to openBVE’s smooth transparency mode, as well as adding some 3D trees to Watford Junction to Rugby to see how the extra detail is handled. Here are some WUXGA 1920×1200 resolution screenshots from openBVE v1.2.2, with full 16xQ anti-aliasing, 16x anisotropic filtering, and with smooth transparency enabled; there aren’t many animated objects visible in these scenes however, so framerates on equivalent hardware (see below) will be a bit lower in the final releases. Some other openBVE add-ons are presented, as well as my own:

openBVE v1.2.2 and X-City South v1.4--click to enlarge openBVE v1.2.2 and X-City South v1.4--click to enlarge openBVE v1.2.2 and X-City South v1.4--click to enlarge
openBVE v1.2.2 and X-City South v1.4--click to enlarge openBVE v1.2.2 and X-City South v1.4--click to enlarge openBVE v1.2.2 and X-City South v1.4--click to enlarge
» openBVE v1.2.2 «, and Birmingham Cross-City South v1.4 with new class 323 and 3D cab (1920×1200)
(London Midland Class 153 externals by » Steve Thomas «)

Horizontal Rule

openBVE v1.2.2 and Watford Junction to Rugby--click to enlarge openBVE v1.2.2 and Watford Junction to Rugby--click to enlarge openBVE v1.2.2 and Watford Junction to Rugby--click to enlarge
openBVE v1.2.2, and Watford Junction to Rugby with 2D and 3D trees (1920×1200)

Horizontal Rule

Amongst the features planned for openBVE 2, are thunder and lightning effects. Early on during the openBVE project I demonstrated rainfall effects and thunder using openBVE 1’s capabilities; while it’s possible to create these effects within a route, I think it would be better to have these effects handled by openBVE rather than the route developer, along with lightning. This is another feature which I’m very much looking forward to, but I wanted to see what kinds of effects could be created anyway, so I did a few experiments. The following screenshots show how I envisage lightning might look on a route like Watford Junction to Rugby in future; the textures require a little refinement as this is just a test, but you get the idea (in full motion, the lightning strikes flicker and the effect looks better):

openBVE v1.2.2 and Watford Junction to Rugby--click to enlarge openBVE v1.2.2 and Watford Junction to Rugby--click to enlarge openBVE v1.2.2 and Watford Junction to Rugby--click to enlarge
openBVE v1.2.2, and Watford Junction to Rugby lightning experiment (1920×1200)
Horizontal Rule

Another openBVE project, the excellent » Chashinai Railway « network, was updated again a few days ago; the 1000 and 2000 series trains now have new plugins catering for ATS-SN as well as ATS-P in the case of the 1000 series train (don’t forget to read the train operation manuals on the website before driving with these safety systems), and both feature photo-realistic 2D/panel2.cfg based cabs with fully working ammeters and slightly dirty windscreens. The rivers found on these routes also demonstrate a good way of implementing moving water, and the new passenger textures, and photo-realistic trees and scenery textures enhance the routes as well. Here are some high resolution screenshots of the routes and 1000/2000 series trains; note the fully working ammeters in the in-cab screenshots (requires » openBVE v1.2.2 «):

openBVE v1.2.2 and Chashinai Railways--click to enlarge openBVE v1.2.2 and Chashinai Railways--click to enlarge openBVE v1.2.2 and Chashinai Railways--click to enlarge
openBVE v1.2.2 and Chashinai Railways--click to enlarge openBVE v1.2.2 and Chashinai Railways--click to enlarge openBVE v1.2.2 and Chashinai Railways--click to enlarge
openBVE v1.2.2, Chashinai Railway (» odakyufan «), and 1000/2000 series trains with working ammeters (1920×1200)
Horizontal Rule

Also, here are a few high resolution screenshots of the recently released » Saijou Line « for openBVE as well, which include various animated objects, night lighting and great atmosphere:

openBVE v1.2.2 and Saijou Line--click to enlarge openBVE v1.2.2 and Saijou Line--click to enlarge openBVE v1.2.2 and Saijou Line--click to enlarge
openBVE v1.2.2 and Saijou Line--click to enlarge openBVE v1.2.2 and Saijou Line--click to enlarge openBVE v1.2.2 and Saijou Line--click to enlarge
openBVE v1.2.2 and the Saijou Line (» http://tozai.s77.xrea.com «) (1920×1200)
Horizontal Rule

Watford Junction to Rugby, Performance, and *BVE

All of these screenshots were captured on a system with a Core 2 Quad Q9650 CPU (3 GHz), 2GB DDR2-1066 RAM and a GeForce GTX 260 graphics card, running on a motherboard equipped with the P45 Express chipset, and as you can see, even Watford Junction to Rugby runs nicely here, never dropping below about 40 fps in the external view with the class 87 and a 600m drawing distance (achievable with 2 CPU cores in use rather than 4). It will likely run even better with openBVE 2’s renderer, allowing those with slower computers to enjoy some higher framerates too. It’s also important to note, out of openBVE, BVE 2, BVE 4, and the latest pre-release version of BVE 5 (after the route has been converted to it’s new formats), that at the moment, openBVE remains the only simulator that is capable of loading and/or handling Watford Junction to Rugby with the high level of detail and object count it currently has, and openBVE handles the route on a slower Athlon64 X2 4200+ system with a Radeon HD 2600 Pro as well. Incidentally, I can’t assess whether Cross-City South v1.4 would be suitable for BVE 5 yet, as the route is very unfinished and there’s still a lot left to add; of course you’d certainly lose all the dynamic scenery and animation effects, along with the 323’s 3D cab, exterior and passenger views after such a conversion–hence I can say that my priority will remain openBVE. Naturally with Watford Junction to Rugby, I want to focus on openBVE primarily as well, and as the project is taking a long time to complete, BVE 2 and 4 compatibility and detail reduction will now be a lower priority, and I’ll only start on this task after all the openBVE features are finalised and the project is otherwise completed.

Lastly, I’ve been used to using openBVE with a 17″, 5:4 aspect ratio TFT monitor at a resolution of 1280×1024, but now I’ve seen openBVE running on a 24″ TFT with a 16:10 aspect ratio, routes and trains can look magnificent, and I’m highly impressed by the additional immersion which is offered, especially with the 323’s 3D cab. The higher resolution also makes arranging and working with a text editor and openBVE’s development tools much more enjoyable, and it’s also better for working with something like a C# IDE for example, or image editing software. More updates will follow soon.

openBVE v1.2.2, working ammeters, X-City South v1.31 bug fixes, minor 323 3D cab update, openBVE route updates

Posted by Anthony_B on September 28, 2009 at 18:34
Horizontal Rule

Information Icon Note: Updated 21:40 BST

Horizontal Rule

openBVE v1.2.2 Released

openBVE LogoopenBVE v1.2.2 has been released, and this version includes some new variables for developers to use in animated objects or 3D cabs, including new variables for acceleration and motor acceleration; more variables can now be used to query specific cars as well. New subjects covering acceleration and motor acceleration which developers can use in the legacy panel2.cfg file are also provided, and some bug fixes are also included in this release. Please visit the » openBVE homepage « and read the » Changelog « for more details.

Horizontal Rule

Working Ammeters

One new variable is accelerationMotor. As mentioned on the openBVE forum, this can be used for creating working ammeters. The class 323’s cab doesn’t feature an ammeter, however, anyone wanting to experiment with this might like to consider the following panel.animated code as a *starting point*. You can copy and paste the code below into the 323’s panel.animated file to add a new ammeter needle to the cab and see it in action. Please bear in mind that I’ve not had time to test this in a variety of scenarios though:

panel.animated code for a simple ammeter (including illuminated needle):

[object]

states = 3d_cab\speedometer_needle.csv, 3d_cab\speedometer_needle_dark.csv

statefunction = if[hasPlugin == 1, !pluginstate[30], 0]

position = -0.43, 2.23, 11.45

rotatexdirection = -1, 0, 0

rotatexfunction = -2.4 + abs[accelerationMotor[0]] * 1.5

rotateyfunction = -1.11

rotatezfunction = -1.57

rotatexdamping = 2, 1

Notes: in the rotatexfunction line, -2.4 determines the needle rotation with no motor acceleration, and 1.5 determines the needle rotation with maximum motor acceleration. You can adjust these two values according to your ammeter gauge design. If you add an ammeter to your own 3D cab, remember that the statefunction line and multiple states (*.csv files in this case) may not be necessary depending on what plugin DLL, if any, you wish to use. When it comes to designing full 3D cabs for the class 86 and 87 electric locomotives for use with Watford Junction to Rugby, I’ll revisit ammeter design in more detail.

Horizontal Rule

Cross-City South v1.31 Bug Fixes and 3D Cab Update

I’ve also fixed a few bugs in the Cross-City South route. There were a few objects (houses, warehouses etc.) which included some surface lighting issues, which have now been fixed. Some class 170 3D objects also contained incorrect ‘Color’ commands resulting in errors being reported when the routes were loaded; these have now been changed to ‘SetColor’, which is correct for CSV format objects. As some of you will know, the Cross-City South also uses some .Sta commands only for signalling approach control purposes, which aren’t meant to be stopped at. However, you would still be penalised if you passed such a station without stopping. Thanks to Paul Sladen, I’ve now corrected these .Sta commands so that you can pass them without being penalised, while preserving the approach controlled signalling functionality.

You can download the full v1.31.03 route package via the Cross-City South download page.

There aren’t any new features included, as all of those improvements are going into the Cross-City South v1.4 project instead, and I’d prefer to hold those improvements back until the v1.4 is ready for release, as the end result will be more enjoyable that way.

Incidentally, the changes to the .Sta commands are as follows (the ArrivalTime and PassAlarm arguments, which are underlined):

Old: .Sta ;;09.4300;;-1;1;;;1;0;;11
New: .Sta ;P;09.4300;0;-1;1;;;1;0;;11

Important Note: Those of you still using BVE 4, will find that the route files now call upon the openBVE version of the unrefurbished class 323 EMU by default (Train\Cl323 Unrefurb_openbve). BVE 4 users can either install the openBVE version of the train, or edit the route files to use the older BVE 4 class 323.

Horizontal Rule

openBVE 3D cab screenshot I’ve also updated the 323’s 3D cab so that it makes use of the new hasPlugin variable. If you’re using openBVE v1.2.2 with a non-Windows operating system, then this will allow the cab illumination to work in the absence of the Windows only plugin DLL, which wasn’t the case previously.

I’ve also made some adjustments to the placement of the brake gauge, as it wasn’t quite right before, and now when you pass through a neutral section, the cab lighting should remain unaffected as the UKMUt.dll’s ats30 (pantograph up) is used as well as ats31 (Line Volts) now. The carriage light dimming effect will be retained in the passenger area once the new 323 external objects are released however. I’ve also remembered to remove several superfluous GenerateNormals statements from some objects this time, as they serve no purpose in an openBVE add-on.

Someone also kindly informed me that there may be some further innaccuracies with the cab’s indicators; once I’ve investigated further I’ll address these issues at some point in future. It’s also nice to note that the 3D cab may have been downloaded perhaps as many as 1500 times since it’s release.

Download:

» 323_unrefurb_3d_cab_28-09-09.7z « [1.7 MiB — requires openBVE v1.2.2]

Important: Also requires » Cl323 Unrefurb_openbve_05.02.09.zip « to be installed first.

Horizontal Rule

Other Things

I’m not making much progress with my projects at the moment, and I know that some of you may be disappointed that I’ve not yet finished Cross-City South v1.4 despite me saying that it’d be done before now (this is also why I’m usually reluctant to give release dates, and I shouldn’t have done so where this project is concerned). Rest assured, barring any disasters, it will be finished eventually and I’m still in the game, however, sometimes circumstances in the real world prove to be too much of a distraction, and it means that what one wishes to accomplish in the simulated world has to wait for a little while. This won’t last long however, and patience will be rewarded.

Horizontal Rule

And Finally…

The Saijou Line for openBVE was released a few days ago (the author’s » blog « is linked to via my blogroll), and this is an openBVE exclusive route featuring some very nice atmosphere and night lighting. There are a few errors, however the route is well worth giving a try, as it’s a good example of how animated objects and lighting can be used to bring much more life to a route and make it that much more enjoyable. You’ll find a variety of blinking lights, such as car indicator lamps, and the aviation obstruction lights fitted to tall structures (I’ll be modelling the same feature on the cluster of 250m tall VLF radio towers at the Rugby Radio Station on the Watford Junction to Rugby route). Moving cars and buses can also be found on roads, as well as flashing level crossing lights, road based traffic lights which change when the train is approaching, animated water, and moving elevators. You can download the route here: » http://tozai.s77.xrea.com/BVE/Sjyou.html « (the author’s homepage is here: » http://tozai.s77.xrea.com «)

openBVE and Saijou Line--click to enlarge openBVE and Saijou Line--click to enlarge

Information Icon Edit: Another openBVE route recently updated, was the Chashinai Railways network, along with the 9000 Series train; when this train is used with the Misaki Line in particular, in addition to ATC, you can now enjoy simulated TASC (Train Automatic Stopping Controller) and ATO (Atomatic Train Operation) systems which enable fully automated driving, thanks to a new plugin which enables sophisticated safety system simulation. The 9000 series’ panel also includes photorealistic dirt on the windscreen, increasing realism. Visit odakyufan’s website for the updates, and don’t forget to read the Train Operation Manuals before you start: » http://odakyufan.uuuq.com «

openBVE and Chashinai Railway (Misaki Line, 9000 Series train with ATC, TASC and ATO)--click to enlarge openBVE and Chashinai Railway (Misaki Line, 9000 Series train with ATC, TASC and ATO)--click to enlarge